Specification:
| Product name: | XANES 1401B XHP50 2150Lumens Brightness Zoomable LED Flashlight |
| Brand: | XANES |
| Model: | 1401B |
| Emitter Type: | XHP50 |
| Material: | Aluminum alloy |
| Mode: | High,Med,Low,Strobe,SOS |
| Lumens: | 2150LM,1500LM,1100LM, / , / |
| Battery Configurations: | 2x18650/26650 Batteries (Not included) |
| Voltage Input: | 3.7v |
| Switch Type: | Clicky |
| Switch Location: | Side of the Flashlight |
| Max Output: | 2150Lumens |
| Range: | 260m |
| Waterproof: | IPX-8 Waterproof |
| Color: | Black |
| Weight: | 229g(without battery) |
| Size: | 21cmx5.4cmx3.2cm(LengthxHead diameterxTail diameter) |
Features:â— Intelligent digital circuit control, linear output, 1000mA rated current,the nominal operating voltage of 3.7V;
​◠Aluminum alloy, high hardness rubber and plastic;
​◠Military regulations three hardened, wear-resistant, corrosion-resistant, by use, feel good, non-slip at the whole waterproof design, O-ring waterproof seal, the product better waterproof, heavy rain normal use;
Notes:
​◠Please according to the flashlight voltage and battery requirements of choice to use the flashlight,not indiscriminate use, in order to prevent the circuit board burn out, different models, different voltage batteries can not be used at the same time;
​◠In use, when the brightness of the flashlight changes significantly, turn off the flashlight to prevent excessive discharge of the battery, timely charge; note the battery waterproof, moisture-proof, drop, etc., according to the charger charging speed, Overshoot
​◠for a long time do not use the battery, the battery should be full, and in about 3 months to maintain normal charge and discharge, so as to avoid chemical corrosion;
​◠Lamp wall to keep clean, absolutely can not be wiped by hand or hard objects, leaving a clear fingerprint on the lens, gently wipe with a cotton swab dipped in lens cleaner;
​◠Do not prolong the flashlight and sunlight, water, chemicals and corrosive gases and other contacts, so as not to damage the flashlight;
​◠Non-professionals do not disassemble the flashlight, so as not to damage the circuit board.
​◠Do not direct the light to the eyes, so as not to hurt the eyes;
​◠Do not over-voltage use, the voltage should not exceed 4.2V, the battery do not reverse connection, otherwise it will burn the circuit board;
​◠When using the flashlight, check the thread is tightened not loose, otherwise it may cause the goods not bright;
​◠Flashlight should be avoided in the sun or high temperature environment, please remove the battery, remove the fully charged store in a cool dry place;
Package included:1x XANES 1401B XHP50 2150Lumens Brightness Zoomable LED Flashlight
2x Battery tubes
1x Lanyard
